Microfunnel™ filter funnels, a Pall Life Sciences product, are convenient, ready-to-use disposable filter funnels for quality control analysis of aqueous fluids used in pharmaceutical production, water, and food and beverage applications.
Product performs as sample container and filter funnel all in one. No need to transfer sample from cup to disposable funnel and risk introducing contamination.
MicroFunnel Plus AP unit allows aseptic collection of the sample through the lid sample port. No need to remove lid.
MicroFunnel Plus products with Supor™ membrane are designed to allow sampling of hot water up to 90°C.
Vented lid snaps to a liquid-tight seal and allows filtration without having to open the funnel and risk introducing contamination.
Vent filter ensures no airborne contamination is drawn into the funnel during filtration.
Attaches directly to a standard laboratory manifold or use with adapter and stopper.
Volume graduations are clearly marked for ease in measuring your sample volume.
Individually bagged and labeled for contamination control and lot traceability.
NEW Packaging* see Specifications for more information
Specifications
Materials of Construction
Filter Media: GN-6 Metricel™ (mixed cellulose esters), Supor™(hydrophilic polyethersulfone), and Metricel™ Black (modified polyethersulfone) membranes
Support Pad: Cellulose
Funnel and Base: Polypropylene
Adhesive Gasket: Urethane
Funnel Cover: Polyethylene with hydrophobic Versapor™ membrane (acrylic copolymer on a non-woven support)
Bag: Polyethylene
Adapter: Polyethylene
Plug: Polyethylene (PN 4807, 4808)
Effective Filtration Area
13.46 cm2
Dimensions
100 mL Funnel
Height: 7.6 cm (3.0 in.) with cover
Diameter: 6.1 cm (2.4 in.) with cover
300 mL Funnel
Height: 8.9 cm (3.5 in.)
Diameter: 8.7 cm (3.4 in.)
Maximum Vacuum
63.5 cm Hg (25 in. Hg) (vacuum use only)
Maximum Sample Collection Temperature
PN 4807, 4808, 4829: Ambient
PN 4809, 4814, 4823, 4843, and 4844: 90°C (194°F)
Gamma-Irradiated
Validated dose 15 – 30 kGy
New Improved Packaging!
No mistakes—clearly labeled
Easy to peal—hermetically sealed
Secure during shipment—thermoform pack
Applications
Improves the efficiency of monitoring your water system while reducing the introduction of contamination.
Eliminates steps in sample collection and testing that could potentially contaminate your sample.
Gridded 0.45 μm GN-6 Metricel™ membrane is ideal for analysis of ambient water by Membrane Filter (MF) Technique.
MicroFunnel Plus with 0.45 or 0.2 μm Supor™ membrane is designed for sampling hot water (such as that found in hot loop WFI systems).
Performance
How to Use the MicroFunnel Plus Filter Funnel
Sampling Ambient Water
Carefully remove the vented lid and collect the sample.
Securely snap lid in place to prevent sample loss. Transport sample to laboratory for filtration.
Remove membrane vent from base, place funnel directly onto manifold, and filter the sample.
Gently grasp funnel then remove and discard lid.
Release cylinder from base by squeezing the midpoint of the cylinder.
Remove the membrane, plate the filter, and incubate.
Collecting Hot Water Samples
Place funnel into holder with graduations visible through the viewing slot. Carefully remove the vented lid and collect the hot water sample.
With funnel and holder resting on a firm, level surface, securely snap lid in place to prevent sample loss. Remove funnel from holder and transport sample to laboratory for filtration. (Proceed with steps 3-6 for ambient water.)
相关文档
Documents sections
APPLICATION NOTE
EN
1.Cleaning procedures for ÄKTAprocess system external surfaces
